There are many important mechanics that players need to understand if they hope to excel in the world of Satisfactory, including building an efficient factory. One of the most important aspects of the game is that players need to understand how to create the most efficient and organized factories possible. If a factory is more organized, the player can navigate it faster and acquire the necessary resources more effectively. This guide shows players how to make efficient factories.
In the game, players will need to figure out how to mine each of Satisfactory's resources and convert them into usable parts. They also need to be able to transport each of these resources back to their main factory area by using things like conveyor belts and pipe systems. Players who cannot do these things will never make it to the game's later stages.
Satisfactory: How to Make the Most Efficient Factories
Balancing Load With Production
Knowing where everything is makes the player's life much easier. For example, smelting ores away from the main base is recommended in Satisfactory as raw ore takes too much space and makes the base size quite massive. In addition, players should also use a calculator to figure out how much space they require for their base.

Satisfactory: How To Find & Use Mycelia
In Satisfactory, players need raw materials to refine into building parts for high tech gear and facilities. Here is where to find Mycelia.
This includes taking into extra space for expansion and more efficiency. Another great tip Satisfactory players can follow is not to put up any walls before everything is finalized, as they might have to reconfigure layouts and lights. Alternatively, you can use a recipe by someone like YouTuber SpectrumDad to understand the exact numbers and layout you need for your starting factory.
See what exactly to keep in mind in the following categories below:
Separating By Type
One of the most important things players can keep in mind when deg their factory is keeping things separate and in their own areas. If the player has a section of their factory that is being used to convert Iron Ore into simple Iron parts then they don't want to toss machines that make Copper parts in there. This can get very confusing quickly, so it's best to build a separate factory or an additional floor for any other Resource types.
This gets a little more difficult with complicated part types like steel, which require iron, copper, and coal to create. Rather than separating based on resource type, the player should separate their areas based on the kinds of crafted parts. Have an Iron, Copper, or Steel part factory or floor.
This can be accomplished by using various types of splitters and mergers to move parts to the right place to make the various parts you need. In the beginning, you will be building things like Iron Plates and Concrete, but you need to master these building basics early so that you are able to make much more complex builds later on.
Chaotic Beginnings To Fuel Bigger Builds
Every player has to start somewhere, and you will not have the biggest and most efficient factory right off the bat. One of the biggest mistakes players can make is attempting to create an organized factory in Satisfactory immediately in the game, which will take players a lot of time in the early hours. Instead, it is better to construct a haphazard, chaotic factory at first that will help the player push their way through the first couple of Tiers.
While this more chaotic factory creates things, the player can then spend their time working at a much more efficient factory nearby. They can set up all their machines and power sources as they wish and then wait to activate it until its all put together. The player then just has to direct the resources they need away from their old factory and to the more efficient one.
Like many simulator games, you have to start small and gain resources while waiting for the right moment to introduce something new. This is no less the case here, and you need to make sure you have the resources and the parts going as soon as possible before trying to create something more beautiful and aesthetically pleasing - as well as efficient.
Set Up Proper Supply Lines
As the player makes it further into the game, they will need very efficient supply lines to keep up with their high demand for resources. While conveyor belts are perfect for nearby nodes, transporting resources can be very slow over longer distances.
To keep things running smoothly, players will instead want to set up trains and drones in Satisfactory that can quickly transport resources around the world. This is particularly useful as the player has to travel further away from their main hub area to get their hands on different resources.
As players continue on in their transportation journey, other methods of Transportation will open up, with Hypertubes being the current fastest way to transport goods from the various hubs. Each mode of transportation has its own pros and cons, and some updates have treated some options better than others, but they are all fairly reliable at this point in the game, and the faster and more efficiently you can move supplies, the better off you will be.
Splitters, Mergers & Wall Mounted Sockets
Splitters and Mergers are a big part of any organized factory because they allow the player to properly direct crafted parts differently. Splitters are great for when the player has crafted a high number of simple parts and wants to split them between Assemblers to create higher-tiered parts.
When placing these items, you will want to make sure the inputs and outputs are facing the right direction. You do not want to send materials backwards or accidentally merge supplies into a conveyor belt you did not want.
Mergers, on the other hand, are best used to cut down on the amount of conveyors needed and are particularly helpful when the player is trying to direct parts at the end of their factory into storage containers. Finally, Wall Mounted Sockets are for directing power currents through walls, allowing the player to set up generators outside of their factory without putting down an obscene amount of power poles. This saves resources and keeps things looking cleaner.
Clean Up New Areas
Before you start working on the factory and setting up supply lines, not every location will be cleared out for you. Instead, you will want to make sure that the new factory you are building does not have much baggage, and you can clean off the platforms and continue once the area is cleared out.
And, if you had an old factory, once the new, more efficient one is built, go ahead and break it down and get some resources back once you have the new one up and running. It will make things much easier in the long run if you clean up after yourself as you go along. For instance, the old factory can now become something new that it does not have to keep you afloat anymore.
Concrete Floors & Conveyor Poles Are Necessary
\While it's easy to slap down machines and belts on the bare floor, this can cause a lot of problems with space and organization later in the game. Concrete Floors become the player's biggest tool to fight against disorganization. By placing a floor down, the player can set their factory up into a series of structured grids, allowing them to measure their factory lines' exact layout.
Combining this with the Ctrl button allows the player to set up tight and organized structures in Satisfactory. The player can then take Conveyor Poles to layout exactly where Conveyors will travel throughout their factory and make sure they can use all of their space as efficiently as possible.
Understand When To Split Resources
The Splitter isn't just useful for parts but can also be invaluable for resources. If a specific line in a factory has too many resources being pumped into it, then the machines on that line will become horribly inefficient in the long run. A full line means that machines can't process resources quickly, which means resources won't move on the belts, which then means that the resource Miner will become idle.
You will want to consider the number 120 as the ideal rate for materials on a single conveyor belt. For more than that, start splitting it into multiple belts.
All of that leads to parts being produced at a much slower rate. The way to fix this is to install a splitter somewhere on the line to direct resources down a different belt that needs more resources. This saves the player in the long run as they will be able to create more parts while harvesting fewer resource nodes overall. This is part of the load-balancing problem that players will need to deal with.
Have Specific Areas For Storage And Power
One of the best tips that the player can learn for setting up their factory is to try to have specific locations for their storage containers and generators. Storage Containers should be set up near the player's home base and the Sky Elevator. This allows them to easily grab resources and use them to transcend tiers.
With Generators, the player should set up specific power plants rather than just having generators next to every factory line they are needed on. If the player has them all right with each other, it makes refueling the generators much easier as the player doesn't have to run all the way around their factory to find each individual power source. that, as mentioned previously, you can set up generators outside the factory.
The Game's Tendency To Lag
Players who have managed to make their way further into Satisfactory and don't have one of the most powerful PCs on the planet will probably have noticed that the game will tend to lag quite a bit as a factory becomes more complicated. This is due to the fact that there are a lot of moving parts for it to keep track of, so players will want to do everything possible to prevent this.
While you can try the age-old wired connection over Wi-Fi, this is not always an easy solution. Other things to keep in mind that do affect your factory builds are:
- Try to build smaller, decentralized factories and transport the materials back.
- Lower settings if need be.
- Avoid destroying foliage and things that are not directly in the way. The map checks changes you've made when it loads, so if you have destroyed a lot, it will take the map longer to recognize what you have done and increase lag.
Making an efficient factory in Satisfactory is one surefire way to help this because it ensures that the player is able to create the number of parts necessary for proceeding in the game while requiring fewer machines and resources. Keeping factories separated will help this process as well.
Source: YouTube/SpectrumDad

- ESRB
- M For Mature 17+
- Developer(s)
- Coffee Stain Studios
- Publisher(s)
- Coffee Stain Publishing
- Platform(s)
- PC